Description
The RAM ProMaster 🔥 PedalBox Pro – Next-Level Throttle Response
Made in Germany
Instant Throttle Response. Instant Driving Fun.
RAM PROMASTER V6 280 HP/174 HP
The PedalBox Pro enhances your RAM Promaster Vans factory throttle response by eliminating the built-in delay from the accelerator pedal.
The result? Sharper, more responsive acceleration and a noticeably more dynamic driving experience—right from the start.
We are an Authorized Dealer and Installer <— Only buy from trusted providers for the 5 year product warranty
⚙️ What Does the PedalBox Pro Do?
The PedalBox Pro modifies the signal between your accelerator pedal and the engine, unlocking performance that’s already in your vehicle. No more sluggish starts—just immediate response when you press the pedal.
⚡ How Does the PedalBox Work?
Most modern vehicles use “Drive-by-Wire” systems—also known as ECT or ECM—where your accelerator pedal sends an electronic signal to the engine, instead of using a traditional mechanical cable (the old-school Bowden cable). While this technology improves safety and efficiency, it often creates a noticeable lag between when you press the pedal and when your vehicle actually responds.
That’s where the PedalBox comes in.
The PedalBox optimizes your vehicle’s throttle response, eliminating that frustrating delay and delivering faster, more precise acceleration. You’ll feel the difference especially during quick starts and when passing on the highway—where timing and performance matter most.
In simple terms:
🚫 Less lag.
⚡ More power when you want it.
🕹️ Instant response at your feet.
PedalBox Pro_ Simple 3-Step Installation NWO 2025
🚗 5 Driving Modes at Your Fingertips
Easily switch between five custom driving programs:
-
City – Balanced and smooth for urban driving
-
Sport – More responsive, with quicker acceleration
-
Sport+ – For peak performance and ultra-fast response
-
Eco – Improved fuel efficiency and smoother throttle
-
Standard – Return to stock behavior anytime
Fine-tune each mode even further with built-in +/- sensitivity adjustments, so you can dial in your perfect throttle feel.
🔧 Plug & Play Installation – Wireless and Simple
Installation is a breeze—just 3 quick steps and you’re ready to roll. The PedalBox Pro comes pre-programmed for your specific vehicle, so there’s no extra tuning required. Wireless connectivity makes the install clean, modern, and hassle-free.
🔍 PerfecTune™ – Personalized Throttle Calibration
With PerfecTune, your PedalBox Pro auto-calibrates to your vehicle and your driving habits. This smart feature ensures the system adapts to your unique throttle characteristics for a perfectly tailored response.
🚀 Upgrade Your Drive – Without a New Vehicle
Feel like you’re driving a whole new car—without the price tag. The PedalBox Pro transforms your driving experience with a newfound sense of power and precision.
🇩🇪 Engineered in Germany – Backed by DTE Systems
This is the original PedalBox, manufactured by DTE Systems and built to the highest standards of German engineering. Certified with ECE and CE marks, it meets rigorous safety and quality requirements for peace of mind and performance you can trust.
Click here for info about the Manufacturer
Want to give your vehicle a whole new attitude?
👉 Install the PedalBox Pro today and feel the difference.
Certifications.
The PedalBox+ is certified by UN ECE R10 for automotive usage in all UN/ECE and
associated countries worldwide (www.unece.org) .
PedalBox+ further is CE approved for use in the European Union.
PedalBox+ is designed and made by DTE Systems GmbH in Germany. DTE Systems GmbH
is regularly verified based on ISO 9001 by TÜV Austria for production of automotive parts
compliant to German and International road traffic laws.
The PedalBox+ Reduces the pedal travel required to reach the “Throttle Wide Open” position.
- Suitable for manual or automatic transmissions
- Sprinter specific programming
- Transmission applies power evenly
- Ready to use in seconds
- Suitable for Gasoline or Diesel engines
- Reduced lag on automatic gear changes
- The PedalBox+ changes the characteristics of the throttle pedal. Vehicles are designed for the “average” and to suit all conditions. The PedalBox+ optimizes the throttle response, and removes the factory “lag”.
Safety standards.
Through redundant components and signal
paths, the PedalBox+ ensures and complies to the same safety mechanisms as the original
throttle itself. Thus, the ECU’s safety mechanisms are kept active and remain unchanged by
an installation – any potential malfunctioning of the throttle including the connected PedalBox+
remains to be traceable.
Electronic throttle. All electronic throttles installed in certified cars have to comply with strict
safety standards, including redundant signal paths and specific protocols to ensure the safe
functioning of the throttle at all times. The ECU constantly monitors the throttle’s safety
signals to prevent malfunctioning and unintended acceleration or deceleration.
The PedalBox+ is designed in a way that ensures that all required safety measures of the
original throttle continue to work as intended.
Asthe device only influences the existing throttle signal, the functioning of the device equals an
adjusted way of how a driver physically pushes or releases the throttle. Such as various
drivers have different ways of how to use the throttle, the PedalBox+ creates an adjusted
driver behavior within the original range of the throttle.
Other vehicle parts. The PedalBox+ is connected solely to the electronic throttle and does not
have any direct effect on other parts like engine, engine management systems, gear box,
turbo or ECU. By design, there are no changes whatsoever in original vehicle parts,
registered engine characteristics such as power or torque, emissions or braking behavior
beyond the original car’s working range with an analogous, appropriate driving pattern.
