Mercedes Sprinter Van Airbag Suspension / Air Lift Automatic Lifting / Leveling Suspension Control System

Description

Sprinter Van Air Lift Air Lift Load Controller Compressor System for Air Helper Springs- Heavy Duty – Dual Path for leveling

We Are An Authorized Airlift Dealer and Installer

TWO YEAR WARRANTY! We are a full Sprinter service & repair provider. We install these systems and have the experience to aide your installer with technical support. We Warranty every part we sell and are here to help you and your repair shop.

• Air Lift Air Suspension Compressor Kit – AL2585sx

  • Wired Control
  • Dual Path
  • Air Lift
  • Analog Display

  This heavy-duty compressor system automatically kicks in if it senses your air spring pressure is too low. A sleek, one-touch gauge in the cab lets you monitor and adjust 2 air springs independently. For heavy-duty and commercial applications.

  Features:

  • Compressor system lets you monitor and adjust 2 air springs independently with a dual-path, in-cab controller
    • Level your vehicle front to back
    • Get side-to-side leveling of off-center loads by inflating each spring with a different amount of air
  • Automatically restores air spring pressure when it is too low
    • Detects when air pressure in your helper springs falls below minimum safe level
      • Minimum pressure level is typically set at 5 psi, but you can adjust the system to sense when air pressure is below 10 psi
    • Keeps air pressure above minimum level to ensure long spring life
  • Compact gauge with one-touch control on face
    • Included stand lets you mount gauge on your dash
    • Standard gauge size fits most custom pillar pods or dash mounts (not included)
  • Perfect for heavy-duty and commercial applications and frequent hauling or towing
  • Compatible with any brand of air springs
  • Kit includes compressor, gauge, wiring harness, air lines, gauge stand and hardware
  • Max PSI: 120
  • 2-Year limited warranty
  • 60-Day satisfaction guarantee

  Automatic Pressure Sensor

  Low air pressure is the leading cause of air spring failure. To avoid this, you must either regularly monitor your air springs or find a device that will do that for you. Air Lift’s Load Controller does just that. If the air pressure in your air springs falls below the minimum safe level of 5 psi, the system’s low-pressure sensor detects the decrease in air pressure. Then the compressor activates automatically to adjust pressure as needed. If your particular application requires you to maintain a minimum of 10 psi in your air springs, you can also set the system to activate when the air pressure is below 10 psi.

  Stylish, Compact Gauge

  
  
  Load Controller comes equipped with a sleek-looking, compact gauge that provides detailed monitoring of your air pressure. The space-saving gauge can be mounted in whichever way works best for you. Just attach it to your dash using the included mounting pod. Or for a from-the-factory look, install the gauge using any custom pillar or dash pod (not included) with a 2-1/8 inch pre-cut hole.

  Built into the face of this gauge is a one-touch, push-button control that allows you to inflate or deflate your air springs while monitoring their psi.

  Dual-Path System

  Load Controller is made to help support your air springs as they take on weighty loads, and it’s great for heavy-duty and commercial applications. The dual-path controller lets you adjust two air springs independently of each other for better control. So aside from leveling your vehicle front to back, you can also level it side to side by putting a different amount of air into each spring. This allows you to even out an off-center load.

  Alternatively, you can use the Load Controller to adjust and monitor two pairs of air springs independently. Using this configuration, you can inflate your front pair of springs to a different pressure than your rear springs. This will allow you to level your vehicle front to back.

  Determining Ride Height

  Load Controller will help to keep your vehicle at normal ride height. You can find the normal ride height of your vehicle by unloading it and measuring the distance between the bottom edge of your wheel well and the center of the hub. After you find and record this distance, you can regulate the amount of air that you send to your air springs to maintain normal ride height – even when you are hauling a heavy load.

  25856 Air Lift LoadCONTROLLER Dual Path Heavy Duty Compressor for Air Bags

CALIFORNIA WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov